Aqueous Hobby Color: Gundam Seed Freedom Color 水性漆 ~ 高達專用色 [半光澤] (10 ml) HUG301 - HUG308

The water-based Gundam Color series now includes colors for Seed Freedom!

New colors recommended for the kits of the new Rising Freedom Gundam and Immortal Justice Gundam, new models appearing in "Mobile Suit Gundam Seed Freedom", as well as other colors for the new models appearing in the series will be added to the lineup.

As with the previous "Mobile Suit Gundam Seed series", these new colors are based on water-based hobby colors and are available as water-based Gundam colors.

Can be used for both brush painting and airbrush painting.

*The "Water-based Gundam Color" series with HUG product numbers is based on "Water-based Hobby Color". Use water or the dedicated "Water-based Hobby Color Thinner" to dilute.

*The type of paint is different from the "Gundam Color" series with UG product numbers. Colors cannot be mixed.

*If you need to dilute, please use water-based hobby color thinner or water.

*Do not mix with other types of paint, such as Mr. Color's version of Gundam Color.

Aqueous Hobby Color is a very safe paint which has a high degree of user friendliness.

Aqueous Hobby Color paint can be diluted with water if desired, while paint brushes can be cleaned and washed out in water. Ensuring that this is before the paint is dry.

The solvent contained in Aqueous Hobby Color paint is very mild.

It provides a glossy texture and very good leveling qualities (i.e the smoothness of coated film of paint), resulting in a very good level of painted finish.

In particular, the gloss level achieved with the use of Aqueous Hobby Color gloss paints is excellent.

Gloss levels obtained using gloss coat Aqueous Hobby Colors can be adjusted by using H-40 Flat Base - mix approximately 5% of H-40 Flat Base to convert gloss colors to a matt finish, or 5 to 10% for a semi gloss finish.

The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.

It is not necessary to dilute Aqueous Hobby Color for brush painting as a basic rule, but if using an airbrush to spray Aqueous Hobby Color, dilute the paint with 100 to 150% Mr.Aqueous Hobby Color Thinner (T-110 0r T-111).

When brush painting, generally 1 to 2 coats are recommended, and 2 to 3 coats when using an air brush.

If painting a light color over a darker base surface, more coats of paint may be required.

*When painted on ABS resin parts, the paint penetrates into the resin and the parts become friable or develop cracks.

Check the instructions in the assembly manual or on the parts runner and try to avoid painting on ""ABS resin parts"".